Q: Each time I add a dimension for diameters, I get only the following results:
How can I set the diameter symbol（φ）between the dimension baselines, as shown below?
A: You can do this by changing a setting in the Dimension Style Manager. Here is how to do it, step by step:
1) Command: dim (Press Enter.)
2) Select the Fit tab, and then turn on the options illustrated below.
3) Click OK to exit the dialog box.
1) Command: dim (Press Enter.)
2) Select the Fit tab, and then turn on the options illustrated below.
3) Click OK to exit the dialog box.
Tidak ada komentar:
Posting Komentar